...
Description: Digital relative humidity and temperature sensor
Justification for selection of specific part: ??
Datasheet link: https://sensirion.com/media/documents/33FD6951/662A593A/HT_DS_Datasheet_SHT4x.pdf
Associated passives/components:
100nF capacitor
2x 10k resistors
Interface: I2C
Footprint: weird footprint
Breakout: https://www.adafruit.com/product/5665
Should work for driver development/testing
Notes:
3.3v supply voltage
Maximal power-up time = 1ms
Also measures temperature – not using this functionality due to modular nature of board
Accurate to ±1.0 %RH
...
Description: Air velocity sensor module with 12-bit digital output
Justification for selection of specific part: ??
Datasheet link: https://www.mouser.com/datasheet/2/698/REN_FS3000_DST_20230207-3075780.pdf
Associated passives/components:
3x 0.1uF capacitors
1uF capacitor
Interface: I2C
Footprint: also a weird one
Breakout: https://www.sparkfun.com/products/18768
Possible choice but expensive so maybe find an alternative?
Notes:
3.3v supply voltage
Temperature Sensor – https://www.ti.com/product/LMT87
Description: Analog temperature sensor with Class-AB output
Justification for selection of specific part: ??
Datasheet link: https://www.ti.com/lit/ds/symlink/lmt87.pdf?ts=1728144032765&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FLMT87
Associated passives/components:
0.01uF capacitor connected between Pin 4 (VDD) and GND, other VDD pins connect to power plane
Interface:
Analog - output voltage inversely proportional to temperature as shown below
Footprint: SOT(5)
Notes:
2.7v to 5.5v supply voltage
0.7ms power-on time
...
Need input on chip to use - or do we need it?
Description:
Justification:
Datasheet link:
Associated passives/components:
Interface:
Notes:
12v to 3.3v step-down (WIP)
Need input on converter - do we even need this on the board?
Description:
Justification:
Datasheet link:
Associated passives/components:
Interface:
Notes:
...