Versions Compared

Old Version 5

changes.mady.by.user Tanya Lertpradist

Saved on

compared with

New Version Current

changes.mady.by.user Tanya Lertpradist

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  •  Layout

  • # blackbody A = 2

    • One blackbody A per MPPT/array section (front/back of car)

    • combine both irradiance + temp sensors on blackbody C

  • # blackbody C = 3 for front array, 4 for back array

    • 1 irradiance and 1 ambient temp sensor (thermistor) per blackbody C

  • Type T thermocouples embedded in the modules

  •  Thermistor + reader

  •  Irradiance
  •  Mounting strat

  • Blackbody C - drill a hole in the top shell in between modules or cells (depends on how cells are arranged), 3d-print tube to thread wires through and hold sensors above array, tube will go through the top shell and wires will connect to blackbody c attached to the underside of the top shell (must talk to aero for this)

Blackbody A

Hardware Requirements:

...