...
- Open the Profinity Software
- On first set-up:
- Click "CAN Adapters" and add the one that automatically appears
- Add "Prohelion Virtual CAN to Ethernet Bridge"
- Click "Add Device" and select "WaveSculptor22" from the "Motor Controllers" section
- Click on the CANdapter and change the "Candapter BaudRate" setting to "CAN_BAUD_125K"
- Click on the WaveSculptor22 and change the "Base Address" setting to "0x240"
- When connected to the Motor Controller, the indicator lights on the CANdapter, Prohelion Virtual CAN Adapter & Hub, and WaveScultor22 should be green
- Right-click on the WaveSculptor22 and select "Setup and Configuration"
- You can now modify the fields in the different tabs as you see fit
- On first set-up: