...
How to move an IP Camera in CMB1 BSL Small Experimental Rooms |
|
---|---|
1. Unscrew the 2 knobs at the top of the camera assembly and slide the lockblock down to disengage it from the wall track. | pic of knobs/lockblock |
2. If moving between rooms, disconnect the camera from the jackpanel. | pic of snake at jackpanel |
3. Lift the camera assembly off the track and rehang where desired. Alternately, slide the assembly side-to-side. | pic of cam assembly free of track |
4. Reconnect the camera snake to the jackpanel. There are 3 connections: |
|
5. Note the name of the camera you just moved. | pic of camera name sticker |
6. Log into usher (http://usher.communication.utexas.edu and click on Behavioral Science Lab Administration |
|
7. Click on the Camera configuration tab |
|
8. Click the pencil tool to edit the camera you just moved. |
|
9. Choose to enable or disable the camera using the checkbox in the "Activate Camera" column. |
|
10. Click the checkmark to save your settings. If you want to cancel your edit, click the red X. |
|
...