Page Comparison

1. Unscrew the 2 knobs at the top of the camera assembly and slide the lockblock down to disengage it from the wall track.

pic of knobs/lockblock Image Added

2. If moving between rooms, disconnect the camera from the jackpanel.
Note that there are 2 lengths of camera snakes.
Green snakes are 35' long
Blue snakes are 25' long.

pic of snake at jackpanel Image Added

3. Lift the camera assembly off the track and rehang where desired. Alternately, slide the assembly side-to-side.

pic of cam assembly free of track

4. Reconnect the camera snake to the jackpanel. There are 3 connections:
Cam Power
Cam Audio
Cam Ethernet

pic of blank jackpanel showing cam power, cam audio, cam data connections with arrows Image Added

5. Note the name of the camera you just moved. pic of camera name sticker

Image Added

6. Log into usher (http://usher.communication.utexas.edu and click on Behavioral Science Lab Administration

7. Click on the Camera configuration tab

8. Click the pencil tool to edit the camera you just moved.

9. Choose to enable or disable the camera using the checkbox in the "Activate Camera" column.
If a camera is disabled, it will not appear to users.
Choose which room the camera is intalled in.

10. Click the checkmark to save your settings. If you want to cancel your edit, click the red X.