Page Comparison

1. In AVID project Go to the "Settings" tab and then click on "Audio Project"

Image Added

1. Go to the Main tab and choose the Sample Rate as 48kHz
   
   
   Audio File Format PCM
   
   Bit Depth 24 Bit

Image Added

1. In AVID project select and open a BIN to import audio into. Name the bin "Imported Audio" or similar

Image Added

1. Go to >File>Input>Import Media and navigate to the folder that contains the audio files that are to be imported.

Image Added

1. Click on Options

Image Added

1. Then click on "Options" again

Image Added

1. Click on the Audio tab. Choose to convert Sample rate to Project sample rate.
   
   
   
2. Choose to not convert sources with pull-up and down rates
   
   
   
3. Choose to Autodetect Broadcast Wave Monophonic Groups
   
   
   
4. Check Subframe Alignment to Broadcast Wave Start Time. (this helps with keeping sync when exporting to ProTools)
   
   
   
5. Click OK
   

Image Added

1. Select all the files to be imported
   
2. Select the Destination drive
   
3. Select Open to begin importing

Image Added

1. Audio Start Time – Choose the timecode that matches your project TC. Most Likely 23.98
   
   
   
2. Click "OK to All"
   
   
   

Image Added

1. The audio files will appear as audio master clips in your bin.
   

   Anchor
   _GoBack _GoBack

Image Added