Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Only studio lights should be on...no work lights.

Image Added

These buttons designate what KEY or AUX bus your controlling.

Image Modified

For example, this is controlling KEY BUS 2

Image Modified

and this is controlling KEY BUS 3

Image Modified

When setting up chroma key, you do not want these buttons lit up...not even Aux1-3.

It should look exactly like this.

If it looks like this, then you are controlling Key bus 1, which is the only bus that has chroma key.

Image Modified

Once your controlling Key bus 1, press the CHR KEY button...it should look like this.

Image Modified

Now press CAM 1 on the KEY/AUX bus. It should look like this

Image Modified

Twirl these knobs until

The 1st one says "Adv Mode"

The 2nd one says "Green Color"

You can twirl the 3rd one all you want, nothing will happen.

Image Modified

Press the KEY 1 TRANS button

Image Modified

Set up your shot

.

We didn't have a person, so we used the MONITOR cart as a stand in...you can do this too if you also don't have a person.

Image Added

Remove the cart/person/stand in.

Image Added

In a perfect world your scopes would look like this when pointed at the green screen

Image Modified

      
It will probably look more like this.

Image Added

Press the 3rd knob over with "Init" in the screen above it, down like it is a button.

Image Added

What ever is punched up on your program bus will now show through.

For us in this example it is REMOTE, which happens to have a weather map showing.

Image Added