Here is the projector loaded with a reel of film. |
|
|
cord
|
|
there is a tricky metal flap between the projector arms that needs |
|
|
|
Hinged for the loading of film through the gate and unhinged to hold the film flat on gate for projection playback |
|
Put in Hinged position (shown here) for the loading of film through the gate |
Un- hinge it to hold the film flat to the gate. |
|
Thread the film through the sprockets following the guide lines in red. Make sure the film sprockets are on the correct side. Only one side of the film has sprockets. |
|
Here is the guide of how to load the film. Follow the red arrows in this diagram as well as the red lined arrows on the projector itself. |
|
Close up of the lower winding path that is confusing |
|
Film out to To Take up reel |
|
Make sure all the gates are locked
|
|
|
|
|
|
Final loaded film setup for reference. |
|
This is the lever that controls the film playback. Pull forward to play film forward and all the way over to get the Lamp to turn on.
|
|