This WIKI will troubleshoot getting the Video and Audio Interface to display image on the monitorand audio through the speakers
First Quit all applications and | |||
Disconnect the Thunderbolt cable that is going into the cable run under the desk. This connects to our Blackmagic Designs Input and Output box. We are power cycling the box by unplugging the cable. | |||
Plug the cable back into the thunderbolt connection on the MacPro | |||
Turn on the Mac Pro with the Power button | |||
Next go to >Apple>System Prefs | |||
Go to Blackmagic Design Desktop Video pref and double click it to open | |||
Should see Intensity Shuttle Thunderbolt |
| Next | |
Click on the Audio Tab | |||
Quit the Blackmagic Utility | |||
Turn On TV |
| ||
Open AVID or other NLE | |||
There is a button on the timeline that sometimes gets turned off make sure the Hardware Active Button is on | |||
One note about Premiere - You have to set the preferenced Choose "Premiere Pro CC > Preferences > Playback..." | |||
Choose Blackmagic Playback
Click OK | |||
Choose "Premiere Pro CC > Preferences > Audio Hardware..." | |||
Make sure you Preferences look like this | |||
If you get this error click Yes | |||
Click OK | |||
Don't forget to pan channel 1 LEFT & channel 2 RIGHT and don't use any other tracks | |||
USE ONLY TRACK MIXER not CLIP MIXER | |||
Audio Monitoring make sure all the buttons shown here are pressed. |
...