Page Comparison

Image Added
Checkout the "Small Tripod"

Image Added
Shortest the tripod gets is 14 inches

Tallest is 56 inches

Image Added

To set the height unclip these on each leg. The more you unclip the higher the tripod will be. Make sure you match what you unclip on each leg so the tripod is even

Image Added

There is a hinge below the tripod head that when flipped open you can raise the center pole on the tripod to give you more height flexibility.

Image Added

Close the hinge to set the tripod's center column height.

Next we need to take the mounting plate or quick release plate off the tripod this will mount to the bottom of the camera.

Pull the small lever on the tripod head forward to release the plate shown here.

Image Added

Take the plate off we'll mount this to the camera.

Image Added

Take the plate and screw it on to the bottom of the camera using the mounting screw handle.


Note that there are arrows that point to the Lens. Make sure the appropriate arrow is pointed to the lens.

Image Added

Put the camera with the plate attached back on the tripod with the lens facing the front of the tripod.

Need to release this latch to place the plate into the tripod head and tighten the latch to hold in place

Image Added

This knob sets the angle position of the head so you can shoot straight ahead or straight down

Image Added

Image Added

This knob lets you change the pan of the head so you can go 360 degrees around.

Image Added