CMB Undergrad Edit Lab 4.120A

Check the connection from the Thunderbolt 3 ADAPTER from the computer TO the Thunderbolt cable from the Blackmagic Ultra Studio 4K Located under the desk This is the Blackmagic device that delivers audio and video to the OLED Monitor	Image Modified
you can't see this because it is under the desk.	Image Modified
Turn on the OLED using the Remote – Make sure it is set to HDMI 3	Image Modified
On the Mac Go to your System Prefs	Image Modified
Select Sound	Image Modified
Select Output Tab > Blackmagic Audio	Image Modified
Setup the PreSonus Monitor Station	Image Modified
Select the application that you want to run AVID or Davinci Resolve or Adobe Premiere	Image Modified
Change your avid project settings In AVID command 9 and then click format tab

Make sure your project is set to this UHD 23.976 Note troubleshooting tip is to set it to 1080 23.98 and then back to UHD Then back to this
One note about Premiere - You have to set the preference Choose "Premiere Pro CC > Preferences > Playback..."
Choose Blackmagic Playback Click OK
Click on the Setup and choose scale down
Choose "Premiere Pro CC > Preferences > Audio Hardware..."
Make sure you Preferences look like this
If you get this error click Yes
Click OK
Don't forget to pan channel 1 LEFT & channel 2 RIGHT and don't use any other tracks
USE ONLY TRACK MIXER not CLIP MIXER

Versions Compared