...
Check the connection from the Thunderbolt 3 ADAPTER from the computer TO connect to the Thunderbolt cable from the Blackmagic Ultra Studio 4K Located under the desk | |
This is the Blackmagic device that delivers audio and video to the OLED Monitor  you can't see this because it is under the desk. |
|
| Turn on the OLED using the Remote – Make sure it is set to HDMI 3 |
|
| On the Mac Go to your System Prefs |
|
Select Sound |
|
Select Output Tab > Blackmagic Audio |
|
Setup the PreSonus Monitor Station |
|
| Select the application that you want to run AVID or Davinci Resolve or Adobe Premiere |
|
Change your avid project settings In AVID command 9 and then click format tab Make sure your project is set to this UHD 23.976Note  If you don't see image out of AVID troubleshooting tip is to set it AVID format to 1080 23.98 and then back to UHD
Then back to this
|
|
Premiere Pro output settings
One note about Premiere - You have to set the preference Choose "Premiere Pro CC > Preferences > Playback..." |  | |||
Choose Blackmagic Playback Click OK |  | |||
| Click on the Setup and choose scale down | ||||
| Choose "Premiere Pro CC > Preferences > Audio Hardware..." |  | |||
| Make sure you Preferences look like this |  | |||
| If you get this error click Yes |  | |||
| Click OK | ||||
Don't forget to pan channel 1 LEFT & channel 2 RIGHT and don't use any other tracks because you won't |  | USE ONLY TRACK MIXER not CLIP MIXER |  be able to hear them | |