...
Make sure your Headphones or IFB is plugged into the headphones port from the camera. | |||
You will need to have network connectivity for the IFB to function correctly. This symbol under the TC readout means you have network connectivity. | |||
Press the "LOLUX/3" button. | |||
This symbol will appear under the TC readout when IFB streaming is enabled and working correctly. Now the control room can speak to you through headphones connected to the camera. | |||
IF THE IFB DOESN'T CONNECT GO INTO THESE MENUS BELOW | |||
You will need to have network connectivity for the IFB to function correctly. You should see this symbol under the TC readout. (not flashing)The screen grab to the right shows a system that would not function because the symbol is not present. | |||
Press the Menu button on the flip out LCD to bring up the main menu. | Choose "System..." | ||
Choose >Network >"Settings..." which is indented under Network | |||
Choose "IFB Set..." | |||
Make sure the IFB Settings match the DEVA settings. In our example, we have these settings IFB Function = Enable Server Address = 129.116.193.97 Server Port = 8000 Mountpoint stream | |||
When you choose the IP to Set, this is the screen that pops up. We used 129.116.193.97 Click Set after you enter in the IP | |||
Now, Start the stream by clicking on "IFB Streaming" | |||
Change from Stop to Start Or jump out of the menu | |||
Press the "CANCEL" button 4 times | |||
This symbol will appear under the TC readout when IFB streaming is enabled and working correctly. | |||
This symbol will appear if there is an issue. Double check your settings and try again. |
...