Versions Compared

Old Version 6

changes.mady.by.user Susanne Kraft

Saved on

compared with

New Version 7

changes.mady.by.user Susanne Kraft

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Image Removed

>Default Stereo Input

>Device RODECaster Pro Multichannel

Choose whatever RODECaster Pro Input

>microphone, Bluetooth or USB device you want to record

Click OK

Open System Preferences

Open Sound

Input
RODECaster Pro Multichannel

Output
RODECaster Pro Stereo

Open Audition

>Adobe Audition>Preferences>Audio Hardware

Make sure the Audio Hardware is set to RODECaster Pro Multichannel


Default Output set to RODECaster Pro Stereo



Master Clock Out: RODECaster Pro Stereo

Image Removed

Next set the audio Channel Mapping

>Adobe Audition>Preferences>Audio Channel Mapping

Image Removed

>Audio Channel Mapping >Output>RODECaster Pro Stereo Left and Right

Image Removed


Should be set to this by default.


Image Added

To begin recording >File>New>Multitrack Session

New Multitrack Session


Name it and also choose where to save the files in the folder location

click on Browse to set the recording location to your hard drive


Sample Rate 48

Bit Depth 32


Master Stereo

On each track pick what microphone or USB Input you want to record shown here

Next we need to make sure the microphones are set correctly on the RODECaster Pro

Select the Microphone channel selector softkey for the mic you want to use

EX: #2

Then Choose Microphone

Make sure it is set to RODE

Broadcaster

Click the Back button to get to the previous menu

Click On Level

Make sure that Phantom Power is on and the Level is set to a good level in protools this is how you will adjust the input levels18



You can adjust headphone volume with these knobs

Press the R on the track you want to test inputs
Same as protools will have to set levels on the RODECaster in the volume setting sliders don't do anything



Then press the RED record button to start recording on the track

To playback take the tracks out of record

Place the timeline indicator on the point of the track where you want to playback

then click Playbutton on the track


Turn up the USB slider to hear ProTools Playback turn up ceiling speakers to hear playback in the room

On RODECaster board turn up the USB icon Slider