...
4. Click the Connect icon. If your VPN client does not have an entry for UT, add one for vpn.utexas.edu. | |
5. Enter your eid and eid password and your DUO Passcode | |
6. Status should read like this. Now connect to the shares normally. | |
7. To connect to "temp_transfer" or "class_folders" From the “Finder” or click on the desktop of your computer and click >Go>Connect to Server or click “apple K” | |
8. Type in smb://fileserver2.moody.utexas.edu | |
9. Type in your User Name and Password. your UTEID is your username and your password is the UTEID password | |
10. Select the share to mount. Click OK and the share will mount. | |
To mount the editshare you need to have the client installed. Make sure that you are connected to vpn.utexas.edu following the above workflow. | http://172.17.66.133/clients/ESC/ Click on the above link to download the clients for windows and mac and install it. |
Then follow this wiki to put in the IP address and user name and password and mount the shares | EditShare Connect - How to Mount Editshare Volumes |
Windows Workflow:
1. Install the software normally 2. Connect to your ISP: connect to the internet 3. From the >Start menu>All Programs> launch VPN Client. If the software does not have an entry for the UT VPN, type "vpn.utexas.edu". Click the Connect icon | |
4. Enter your user name and password and click OK | |
5. Status should read like this. Now connect to the shares normally. | |
6. Go to the >Start Menu again>Click Run> and type in | |
7. Type in the UN: which is your UTEID with Austin in front of it. Your password is your UTEID password. |