| Open Focusrite Control if you haven't already Note if installing on a new computer you might have to play with the Mac Security settings making sure that you allow access Trick is to log in as admin and re-install making sure that you allow security access No Hardware ConnectedFor No Hardware Connected on macOS– click here. document is also saved on software in the Focusrite folder |
Once installed and running Make sure that the FocusRite is synced to Internal If you don't have it synced correctly no sound will come out. Click on Device Settings Red 4Pre Clock Source make sure it is internal |
|
Click on >File Load Snapshot We have a snapshot for both A and B suites because they are different |
|
Go to >Tempstorage> Templates>Focusrite surround sound setup.ff Click Open Note in case it's lost here are the settings for outputs 3-8 for Suite A
|
|
Note in case it's lost here are the settings for outputs 3-8 for Suite B |
|
Open audio midi setup
Choose >Focusrite Thunderbolt |
|
Configure Speakers |  |
Choose Configuration 5.1 Surround
|
|
| Choose Apply and >Done |
|
| Next open protools ultimate to get 8 channels output Set playback engine to |
|
| Set to Focusrite Thunderbolt |
|
| Then Import the surround sound template for the input and the output |
|
Choose Import Settings |
|
| Choose >tempstorage>Templates> UT RTF Default .pio |
|
| Choose NO here |
|
| Click OK |
|
...