...
Locations of both kits are: DMC 3.208 on the shelf as shown here | |
One Kit is in the The CMB 4.130 control room | |
This workflow assumes we are beginning with the equipment off, dark, and stowed. | |
Gently pull the camera unit out of wall recess with the handle provided. | |
There are 6 objects to turn on, and they each turn on in different ways. They must all be turned-on for this equipment to function properly. | |
1) Turn on the light-switch labeled "Local Reporter Flat-Panel Lights" on the opposite wall. | |
2) Turn on the wall mounted Program Out monitor by pressing the button on the bottom right-hand side. | |
3) Turn on the top, shelf-mounted Teleprompter monitor by pressing the button on the right side. This button is a little difficult to find. | |
4) Turn on the lower, Local Reporter monitor by touching the power symbol on the bottom right side. | |
Turn on the PTZ Camera locate the remote that is attached via velcro to the camera tray | |
Press "CAM01" then press and HOLD the red button for at least 2 seconds to turn thecamera on and display a GREEN light!! | |
Ensure the Telex Telecaster is on. It is most likely already on. Look for green lights like so: If it is not lit up, the power switch is on the far right of the unit. Switch it to on. | |
At this point, the equipment should all be turned on, and look something like this: | |
Control Room should see the DMC 3.208 Image on input CAM 4 on the Ross Switcher |
...