Lavs come with two very similar looking pieces, a transmitter and a receiver. |
| ||||||
Receiver is the end that will plug into the Audio Mixer |
| ||||||
Here is the Receiver plugged into an audio mixer. It will also have the RF on the front of the receiver. | | ||||||
The Transmitter is connected to the microphone placed. Start with the mic about 8 inches below your talent's chin and adjust it from there until it sounds natural in your headphones. |
| ||||||
Make sure both units have 2 AA batteries each. |
| ||||||
ON light turns red for ON |
| ||||||
Out of the box, the transmitter and receiver should have matching frequencies, meaning they can talk to each other wirelessly |
| ||||||
To Change the frequency |
| ||||||
Press up/down buttons to select "Frequency Preset" |
| ||||||
Use the Up and Down arrow buttons to change the frequency | | ||||||
To Set frequency hit SET |
| ||||||
then hit the on/off button to get out of the menus. |
|
Page Comparison
Manage space
Manage content
Integrations