Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To ease fabrication, given the materials and fabrication methods available, the initial CAD model was modified as shown below:in Fig. 1.







Fabrication of Links

The links, guide arm and carriage were additively manufactured (with Fused Deposition Modelling - FDM). This greatly simplified the task of fabricating the complex geometry of the guide arms in addition to reducing machining time required. PLA  was the fabrication material of choice as it is less susceptible to warping compared to other materials available for fabricating with FDM (e.g. ABS - see failed build with ABS in Fig. 2). Also, it provided enough strength and smoothness for the sliding of the rollers on the guide arms.


 Image Added

Fig. 2: Failed build of guide arm caused by excessive warping of ABS


Fabrication of Gears

The driver and driven gears transmitting motion from the motor were  also fabricated with FDM. The gears were designed on geargenerator.com  and exported to STL format for printing. Dimensions  were chosen to amplify the motor's torque output (MA>1). 

...

Base Plate and Stand

The base plate was fabricated using laser cutting laser-cut out of acrylic while the stands were wade of wooden blocks.


Image Added

Fig. 3: Base plate



Assembly

Mounting hubs, set screws and additively-manufactured retention rings were used to achieve tight-fits between the shafts and bearings.

The final assembly is shown below:


Fig