1. Introduction 2. Design Considerations 3. Kinematics 5. Results & Discussion
EARLY ITERATIONS
I originally planned to use the two sets of lawnmower gears on opposite sides of a four-bar (Fig. 1), a design that I altered after the kinematic analysis while retaining the basic idea. I also considered using a four-bar that would trace a circular pattern to spin the fan mechanism, but decided it would be much easier to use a parallelogram design to spin a shaft. Finally, I considered using a belt around the lawnmower wheels instead of a rigid bar to link the trainer and fan rotations, but couldn't find appropriate materials to attach a belt that wouldn't fall off.
...
Figure 6: Roomba gears are driven by the four-bar and increase the speed to drive a fan.
1. Introduction 2. Design Considerations 3. Kinematics 5. Results & Discussion