Raw Material For Class
Mechanical
Wood - which shapes and sizes? - Large sheets that can be cut down to appropriate sizes 4'x4'? Anywhere from 1/8" to 3/8". high grade plywood is a good option
- Plywood 12x12 - 3/8" thick - http://www.mcmaster.com/#1125t21/=14s7p9d
Metal
- 6061 - T6 Aluminum. 0.5"x1"x8'. 0.25"x2"x8'.Aluminum (Order if needed)
Acrylic
- 0.118" x 24" x 48" $278.5212x12 - 1/4" thick - http://www.mcmaster.com/#8560k354/=14s7opf
Delrin
- 0.5"x1"x8'. 0.25x2"x8'(Order if needed)
Shafts
-1/8"x6" (2 per group?)5mm x 1.5' - http://www.mcmaster.com/#1327k38#1272t35/=yv6y6g $115.6814pka9i
Retaining Rings
- 1/8" 5mm (pack of 550) - http://www.mcmaster.com/#97622a102#98317a214/=yv6zi3 $40.2014pkdan
Bearings - low-cost, small and medium (1/4") sizes
-1/8" bushings and thrust bushings http5mm x 11mm x 4mm - https://www.mcmasteramazon.com/#90107a005dp/=yz8qq9 & B01670L6H2?psc=1
Linear Bearings
- Low profile Sleeve Bearings - http://www.mcmaster.com/#2868t31#6723k9/=yz8bap $6.74 & $55.20
Linear Bearings
- Guide Rails - http://www.mcmaster.com/#6723k9#6723k5/=yyqa2d $5.36 each $64.3214s83vx
- http://www.mcmaster.com/#sleeve-bearing-carriages/=yyqayo $12.50 each $150 (Order if needed)
Machine Screw and Nuts
- M3 screws http://www.mcmaster.com/#91239a113/=yz8s0t $12.86
Machine Screw and Nuts
- 4-40 x 1/2" button-head http://www.mcmaster.com/#91251a113/=yrmiy3 $24
- 8-32 x 3/4" socket-head http://www.mcmaster.com/#91251a197/=yz8tjj 25.80
- 8-32 x 3/4" button-head http://www.mcmaster.com/#91255a197/=yz8ub6 $16.02
- 4-40 nuts http://www.mcmaster.com/#90480a005/=yrmlfg $4.35
- 8-32 nuts http://www.mcmaster.com/#90480a009/=yrmltu $8
Wood Screws
- #8 x 3/4" http://www.mcmaster.com/#90294a724/=yrmnjj $78.48
Shoulder Bolts
Tools for the Class
- Hex Set per group Set http://www.mcmaster.com/#5812a35/=yrmugm $83.52
Electronics for the Class
...
- 5x Mini Photocell
- 5x 10k Trimpot
- 2x Gear Hobby Motor
- 2x Generic Servo (Sub-Micro Size)
- 2x Bag of 25 10kOhm Resistor
- 2x Bag of 25 330Ohm Resistor
- 5x 30 Pack of Jumper Wires
- 10x 1N4148 Diode
- 1x Assorted LED (20 Pack) - (5 Red, 5 Blue, 5 Yellow, 5 Green)
- 1x Simon Buttons (4 Pack) - (1 Red, 1 Blue, 1 Yellow, 1 Green)
Soldering iron x 3 - Soldering/Desoldering Kit - http://www.digikey.com/product-detail/en/17501/17501-ND/5252795 - BETTER KIT - https://www.sparkfun.com/products/13086
...
Heat Gun - http://www.digikey.com/product-detail/en/SV803/SDL1750-ND/1132435
Ribbon Cable (10 conductor - 15ft - For 5V connections) - https://www.sparkfun.com/products/10647
...
Supplies for Individual Groups
...
Arduino Uno R3 - https://www.sparkfun.com/products/11021 - $24.95
...