Page Comparison

	Zoom H4 how to connect via USB to computer menus
Turn on the Zoom H4	Image Added
Press the MENU button to access the Menus	Image Added
Click on Menu on the Side Scroll button Use the Scroll to Navigate through menus PRESS the Wheel to choose the selection Scroll to USB AND PRESS THE WHEEL to select it	Image Added
PRESS the wheel TO SELECT AUDIO I/O	Image Added
PRESS connect to connect to the computer Press the wheel to select CONNECT	Image Added
Then plug in your type 1 older USB mini cable to the H4 and your computer	Image Added
Open Audio Midi setup	Image Added
On the Audio Devices should see the H4 Audio In and Out (if not then check the H4 and make sure it is set to connect to computer via USB)	Image Added
Then go to ProTools Aggregate I/O Check the boxes to "Use" H4 Audio IN and OUT	Image Added
Open ProTools	Image Added
Click OK to enable ProTools to record from ANY Hardware	Image Added
Click OK on access to use the Microphone	Image Added
Open or Create a session	Image Added
Create a New Audio Track >Track>New	Image Added
Choose to create a Mono Track	Image Added
On the track menu drop down shown here > Click it to show the I/O and check the box to show inputs and outputs on the track
On the Input interface choose In 3 (Mono) In 4 (Mono)	Image Added
On the output make sure that is set to Built – In Output 1-2 Stereo	Image Added

Versions Compared