Here are the monitors on the stage that the mixer will calibrate the level and sound that the person on stage hears Note that there are 4 monitors labeled here 1-4 Each monitor can get a custom mix assigned via the Soundcraft Monitor Mixer | |
The channels on the board are as follows "A" Faders Press A on the FADERS selection | |
Channels 1-24 are patched in via the stage Snake shown here | |
Channels 25-28 are the wireless mics Yellow = 25 Red = 26 Blue = 27 Green = 28 | |
Crestron and Bluetooth inputs are on the "B" faders Press "B" FADERS to access this | |
"B" FADERS start with Crestron L and R on Channels 31 and 32 Bluetooth L and R on Channels 33 and 34 | |
To send a mix to one of the monitors on stage Press Mix 1 - 4 depending on what monitor you are mixing | |
Then turn up the FADERS on A and B for what ever input you would like to send to the monitor In this ex: we are sending Crestron L and R to Mix 1 | |
Also make sure that the Mono/SEL fader is turned ON and up to zero SEL doesn't have to be on unless you want to access the EQ/HPE/Gate or Comp |
Page Comparison
Manage space
Manage content
Integrations