Open your ProTools Session or Create a new Session and import the 5.1 tracks you would like to turn into an LtRt track.
Make sure the Routing of the session is correct. To do this- Go to >Setup>I/O |
|
Go to Import Settings | |
Go to the templates folder again and choose the UT RTF Default pio
Click Open |
...
Open ProTools and make a new session.
Wav file type 48KHz 24 Bit
Choose where the session will be saved
click Create | |
Go to >File>Import>Audio | |
Navigate to the 6 channel audio files that should be organized in the following order Left = 1 Right = 2 Center = 3 LFE = 4 Ls = 5 Rs = 6
Or if you have one Surround Interleaved File Select It and it will come in correctly Select the audio tracks and choose "Add All"
Then click Done | |
Choose New Track as the Destination
Click OK |
...
Tracks output should look like this
Set the surround sound tracks to the correct Panning settings Using the Multi Channel Panner Windows track order L,R,C,LFE,LS,RS | |
To see the panning larger select the Output Window Button shown here | |
Set the Lfe Channel to this setting
Set it to "Zero" or Unity - this picture shows the LFE slider set to -infinity of nothing. Turn up the slider till you get a "0" in the LFE window. |
...