Page Comparison

RESTART THE COMPUTER BEFORE YOU START THIS WORKFLOW - IF YOU DON'T THE AUDIO WILL

APPEAR TO HAVE DIGITAL NOISE - EVEN THOUGH IT DOESN'T

Open System Preferences	Image Modified
Open Sound	Image Modified
Input RODECaster Pro Multichannel	Image Modified
Output RODECaster Pro Stereo	Image Modified
Open Audition	Image Modified

>Adobe Audition>Preferences>Audio Hardware

Image Modified

Image Removed

Anchor_GoBack_GoBack

Make sure the Audio Hardware is set to RODECaster Pro Multichannel Default Output set to RODECaster Pro Stereo Master Clock Out: RODECaster Pro Stereo Should be set to this by default.	Image Added
To begin recording >File>New>Multitrack Session	Image Added
New Multitrack Session Name it and also choose where to save the files in the folder location click on Browse to set the recording location to your hard drive Sample Rate 48 Bit Depth 32 Master Stereo	Image Added
On each track pick what microphone or USB Input you want to record shown here	Image Added
Next we need to make sure the microphones are set correctly on the RODECaster Pro Select the Microphone channel selector softkey for the mic you want to use EX: #2	Image Added
Then Choose Microphone	Image Added
Make sure it is set to RODE Broadcaster	Image Added
Click the Back button to get to the previous menu	Image Added
Click On Level	Image Added
Make sure that Phantom Power is on and the Level is set to 18 or higher. this is how you will adjust input level in Audition when you record press the plus and minus buttons to adjust levels	Image Added
the Microphone faders on the RODECaster don't adjust recording input level This is how you hear in the headphones!! When you slide them up the headphone volume increases not the recording input level!	Image Added
You also adjust headphone volume with these knobs	Image Added
Make sure that the USB fader is turned down on the RODECaster to prevent feedback	Image Added
Make sure that the ceiling volume is turned down on the RODECaster to prevent feedback	Image Added
Press the R on the track you want to test inputs Same as protools will have to set levels on the RODECaster in the volume setting sliders don't do anything Then press the RED record button to start recording on the track	Image Added
To playback take the tracks out of record Place the timeline indicator on the point of the track where you want to playback then click Play button on the track