Page Comparison

Zoom H4 how to connect via USB to computer menus
Turn on the Zoom H4	Image Added
Press the MENU button to access the Menus	Image Added
Click on Menu on the Side Scroll button

Image Removed

Select USB

Image Removed

Choose Audio I/F

Image Removed

Then Choose
Connect

Image Removed

Use the Scroll to Navigate through menus PRESS the Wheel to choose the selection Scroll to USB AND PRESS THE WHEEL to select it	Image Added
PRESS the wheel TO SELECT AUDIO I/O	Image Added
PRESS connect to connect to the computer Press the wheel to select CONNECT	Image Added
Then plug in your type 1 older USB mini cable to the H4 and your computer

Anchor_GoBack_GoBack

Image Added
Open Audio Midi setup	Image Modified
On the Audio Devices should see the H4 Audio In and Out (if not then check the H4 and make sure it is set to connect to computer via USB)

Image Removed

Image Added
Then go to ProTools Aggregate I/O Check the boxes to "Use" H4 Audio IN and OUT	Image Modified
Open ProTools	Image Modified
Click OK to enable ProTools to record from ANY Hardware	Image Modified
Click OK on access to use the Microphone	Image Modified
Open or Create a session	Image Modified
Create a New Audio Track >Track>New	Image Modified
Choose to create a Mono Track	Image Modified
On the track menu drop down shown here > Click it to show the I/O and check the box to show inputs and outputs on the track