...
The "evertz" is a sync generator that needs to be turned on | |||
Turn on the power switch for the "evertz" unit | |||
Turn on the power for the DigiBeta Video Tape Machine | |||
If you wanted to capture from Hi-8 or 3/4 inch just move the patch from the VHS to the Hi-8 or 3/4 Out. | On the Patch Panel on the rack patch DIGIBETA - HD-SDI OUT to | ||
TERRANEX - SDI IN | |||
Put the tape in the deck | |||
Turn on the Teranex - It'll take a bit to turn on, | |||
Go to >Apple>System Prefs > |
| ||
Choose the ALL settings icon to see all the settings | |||
Choose Blackmagic Design Desktop Video | |||
Click on Teranex settings icon shown here | |||
Video Input - Change Input to SDI Click SAVE | |||
Audio Input - Embedded Click SAVE | |||
Open Blackmagic Media Express | |||
Go to >Media Express> | |||
Set the Video Format to | |||
Put the tape in the deck and hit Play | |||
Click on the Log and Capture Tab in Media Express Wait about 5 or so seconds | |||
You should see image and audio levels Then click on the "Capture" Button to start capturing. Capture Button will turn RED | |||
Capture Button will turn RED | |||
Click Capture to stop capturing | |||
Turn off the Teranex when finished | |||
TURN OFF THE DigiBeta Deck WHEN FINISHED | |||
Turn off the "Evertz" | |||
Close and tighten the screws on the "evertz" door panel to hold it closed |