...
4. Click the Connect icon. If your VPN client does not have an entry for UT, add one for vpn.utexas.edu. | |
5. Enter your eid and eid password and your DUO Passcode | |
6. Status should read like this. Now connect to the shares normally. | |
7. To connect to "temp_transfer" or "class_folders" From the “Finder” or click on the desktop of your computer and click >Go>Connect to Server or click “apple K” | |
8. Type in smb://fileserver2.moody.utexas.edu | |
9. Type in your User Name and Password. your UTEID is your username and your password is the UTEID password | |
10. Select the share to mount. Click OK and the share will mount. | |
To mount the editshare you need to have the client installed. Make sure that you are connected to vpn.utexas.edu following the above workflow. | http://172.17.66.133/clients/ESC/ Click on the above link to download the clients for windows and mac and install it. |
Then follow this wiki to put in the IP address and user name and password and mount the sharesEditShare Connect - How to Mount Editshare Volumes | /wiki/spaces/moodytech/pages/26243343 |
Windows Workflow:
1. Install the software for Cisco VPN shown at the top of this wiki 2. Make sure you are connected to the internet 3. From the >Start menu>All Programs> launch VPN Client . "Cisco AnyConnect Secure Mobility Client If the software does not have an entry for the UT VPN, type "vpn.utexas.edu". Click the Connect icon | |||
4. Enter your user name (eid) and password and click OK | 5. (eid password) and | ||
The second password is on your phone in your DUO app | |||
Status should read like this. Now connect to the shares normally. | |||
6. Go to the >Start Menu again>Click Run> and type in Right click on "This PC" and choose Map network drive | |||
Type in \\fileserver2.moody.utexas.edu\class_folders\ Or If you want a different share \\fileserver2.moody.utexas.edu\temp_transfer\ | research_projects\ Make sure that Connect with using different credentials is checked | ||
Type in the UN: which is your UTEID with AUSTIN\ in front of it. Your password is your UTEID password. It should look like below. User name: AUSTIN\uteid Password: UTEID password8. Choose to remember my credentials Click OK to mount the volume. | |||
You will see the Network volume mount as show here. And you should be able to access the data on the volume. | |||
To mount the editshare you need to have the client installed. Make sure that you are connected to vpn.utexas.edu following the above workflow. | http://172.17.66.133/clients/ESC/ Click on the above link to download the clients for windows and mac and install it. | ||
Then follow this wiki to put in the IP address and user name and password and mount the sharesEditShare Connect - How to Mount Editshare Volumes | /wiki/spaces/moodytech/pages/26243343 |