Connect theLighting Fixturelighting fixture to the lighting grid or findthe fixture on the grid that you want to turn on.Locate whereitthe fixture is plugged in by following the cable up to the numbered square.In this picture example, theLightlight fixture is plugged into circuit "S173" | ||
Next we need to find the "Circuit" to turn on that matches "S1"Go to the chart on the left and find "S"on the vertical side and the "1" on the horizontal side.So "S1" is Circuit 73. | On the Strand Lighting Board,Press F3 to get into the Setup menu | |
Press the "Right" arrowuntil you getto navigate to Menu #9 | ||
Press F2 to confirm "Yes" and reset the defaults | ||
Press F1 to "ESC" and get back to the home page.
| ||
Select Choose "1. Patch"Then press(Select) orF3 to select | ||
Choose "1."Edit Patch"click on Then press F3 to select | ||
Enter in the circuit to assign to the board. "73@40" and follow that by pressing the asteriskkey ( * )/FX PAGE button | ||
The Asterisk keythat isacts the same as an "enter" key on a keyboard.Press toset theconfirm your dimmer assignment. | ||
Make sure that the scene mode is in"Single Scene" seems to work the bestPreset A should be up | ||
Make sure Grand Master is also upon the slider position |
...
To see the settings of the circuits click the ESC or F1 key till the"Main Menu" appears then click F3 or Setup to display the patch menu. | |
| The patch settings will appear per dimmer and by selecting the "right" arrow keycan scroll through all the dimmers and see what circuit ispatched to that controllable dimmer. |