Here is the projector loaded with a reel of film. | ||||
| ||||
2. there is a tricky metal flap between the projector arms that needs | Hinged | |||
|
| |||
Hinged for the loading of film through the gate and unhinged to hold the film flat on gate for projection playback | ||||
Put in Hinged position (shown here) for the loading of film through the gate | ||||
|
| |||
| | |||
Thread the film through the sprockets following the guide lines in red. Make sure the film sprockets are on the correct side. Only one side of the film has sprockets. | ||||
Here is the guide of how to load the film. Follow the red arrows in this diagram as well as the red lined arrows on the projector itself. | ||||
Close up of the lower winding path that is confusing - NOTE YOU DON'T HAVE TO DO THIS PART OF THE WIND PATH UNLESS YOU HAVE AUDIO ON THE FILM BUT IT DOESN'T HURT TO DO IT. | ||||
Film out to To Take up reel | ||||
Make sure all the gates are locked |
| |||
| ||||
| ||||
Final loaded film setup for reference. | ||||
| Anchor | | _GoBack | _GoBack
Page Comparison
Manage space
Manage content
Integrations