Page Comparison

🚨 Controls:

Updates

• Lucy - Learning about components for lighting board (ty Lakshay). Schematic startedLighting schematic in progress

• Eliana - Worked on finding datasheet and connector info for the desired pedal sensor. Current selection might not be used. Completed brakeline portion of the schematic. Pushed her current progress

• Maddie & Krish - Pushed schematic deadline to Nov 14th. Review required. Thanks Lakshay and Prat for leaving reviews!

• Mika - Selected inputs sensors for dashboard. need to order

• Akshay - Display is chosen, camera in progress. Blocked because current choice wasn’t waterproofed (mb)

• Oscar - given controls leader-daughter which is comprised of dashboard

• Second half of workday - tested motor noise on array (woop woop Ikococator)

Week Plan

• Order display, cameras, lights, compute module

Upcoming Deadlines

•  16 Nov 2024 - Leader rework order

🔥 BPS:

Updates

• Michael (the cooler one) got his first PR merged in!

• Fan board, Scrutineering, and PSOM are all in

  • Most soldering and testing is going to have to happen outside of workday

• Starting dev on some test boards

• Admittedly, there is not as much work progress on boards as I’d like

• Clark and Abby are making good progress on their boards

• Pheonix was blocked for a bit by a Lakshay skill issue but is doing well in her project and is moving pretty fast

• Michael is starting work on our watchdog

Week Plan

• BPS members are getting a soldering showcase from Champers during workdayI will also be doing a talk on ✨ reading datasheets ✨

Upcoming Deadlines

•  28 Oct 2024 - Deadline

⚡ Power Generation:

Updates

• Updates Go Here

Week Plan

• Updates Go Here

Upcoming Deadlines

•  28 Oct 2024 - Deadline

• Connor doing docs for eclipse

• Aleena and Isaac and Erika finished up sensor design schematics

• Tanya tested I2c - i2c extender needed

• Tong has generic grow light fresnel/plano-convex lens simulation done. working on constant current PCB

• nash - successfully generated csv files from array shading/irradiance sims

• praneel - finished up MPPT firmware flow chart, started installing firmware dependences. need to plan timelines for firmware.

Week Plan

• praneel need to plan timelines for firmware

• keep working

Upcoming Deadlines

•  Order mppt sensor board by 11/09
•  Tong order constant current irradiance board by 11/09

📻 Data Acquisition:

Updates

• Updates Go Here

Week Plan

• Updates Go HerePit laptop RF receiver in dev.

• Imu + wheel speed daughter board in dev.

• Pychrono sim terrain + weather implemented

• BSP UART close to completion

• Environment board in review

• RF dev boards ordered

Week Plan

• Continue leaderboard dev.

• Continue IMU + wheel speed board dev.

• Continue RF receiver board dev.

• Work on implementing mechanical characteristics into sim

Upcoming Deadlines

•  28 Oct 2024 - Deadline

🔋 Power Systems:

Updates

• Updates Go Here

Week Plan

• Power board schematic finished! good for review

• Watts and Changxu almost done with an eFuse testboard schematic.

• Shaun got polling test done for I2C BSP. Now working on interrupt based test.

• Devin and Dylan finished contactor driver!!!!! Also finished high level block diagram of batt characterization board.

• Jacob and Tony went through a bunch of edge cases with the Active Precharge board. Did a bunch of considerations into potential current pathways, floating nodes, etc.

• Ravi still working on environmental board layout after several changes. Changes include creating a breakout board for humidity, temp, and airflow sensor. Currently trying to find a connector with a smaller form factor as per emech’s request.

• Bosa and Kaden found a power monitoring chip for power monitoring board.

Week Plan

• order contactor driver and (potentially) eFuse testboard

• order mouser components

• get power board reviewed and start layout

Upcoming Deadlines

•  28 Oct 2024 - Deadline

🔌 Electromechanical:

Updates

• Updates Go Here

Week Plan

• starting battery manufacturing

  • Layups can start as soon as the foam core arrives

    • CF and kevelar here already

  • Making test module(s) and doing testing

Week Plan

• order hardware and aluminum

• assemble universal enclosure and do water test workday

• create manufacturing plan for how and when parts are being made

  • outsourced, waterjet, 3d print

  • assembly plan

• get all waterjet files ready to manufacture

• enumerate all hardware needed and order

• Keep doing validation/load calcs of brackets, bus bars, etc to catch any underspeced parts

• get cooling intakes and exhausts done - first design review

• Finalize MPPT/Motor Controller cooling design and purchase fins

• start doing cfd and getting temperature gradients on segments

• if we go to pickle - spot welding with sigma clad

• Compile list of cell data needed for Cesar’s prof

• Set up meeting with professor who works with batteries to review daybreak

Upcoming Deadlines

•  28 Oct 2024 - Deadline

🧑‍🏭 Body:

Updates

• Ergo jig materials purchase request in → manufacturing this week?

• Frame reference 1st iteration finished

• Frame simulation setup progressing

Week Plan

• Updates Go Here

Upcoming Deadlines

•  28 Oct 2024 - Deadline

Frame:

• Finish composites research tasks by workday

• Have ANSYS installed and ready to go for frame concept simulations

• Begin research on potential frame jig designs

Ergo:

• Manufacture ergo jig if possible

• Start steering wheel research/design

• Get Hall effect sensor and brake rotor/caliper specs (currently blocking Daybreak pedal box and brake calcs)

• Print Pedal Jig prototype

Upcoming Deadlines

•  02 Nov 2024 -Ergo Jig Manufactured
•  09 Nov 2024 - All potential drivers measured on Ergo Jig
•  16 Nov 2024 - Roll Cage Position/Bounding box set

🔩 Dynamics:

Updates

• Updates Go Here

Week Plan

• Dynamics overall timeline is made.

• Steering geometry optimization worked with Jacob on

• Unsprung worked on mock uprights based on daybreak due EOD Saturday

• Suspension worked on their practice suspensions due by start of Saturday workday

Week Plan

• Share timelines new gen timeline with members and have them begin CADing the reference sketch parts

• Finish reference sketch unfinalized hardpoints by EOD today

Upcoming Deadlines

•  28 Oct 2024 - Deadline29 Oct 2024 - Reference sketch with unfinalized hardpoints - General/Harshit
•  02 Nov 2024 - Steering rack selected - Steering
•  02 Nov 2024 - Backup tires that aren’t Bridgestone are decided - Unsprung
•  02 Nov 2024 - Mock uprights and hubs - Unsprung
•  02 Nov 2024 - Brake calipers and rotor size decided - Unsprung
•  02 Nov 2024 - Model bending forces and moments on the axle - Unsprung
•  03 Nov 2024 - Axle diameter decided - Unsprung
•  03 Nov 2024 - Axle length - Unsprung
•  04 Nov 2024 - Location of steering rack - Steering
•  04 Nov 2024 - Length of tie rods - Steering
•  07 Nov 2024 - Upper steering architecture selected - Steering
•  09 Nov 2024 - Steering rack extender length - Steering
•  09 Nov 2024 - Bump steer design optimization - Steering
•  09 Nov 2024 - Finalize brakes and rotor config - Unsprung
•  09 Nov 2024 - Caliper and motor mount for Swingarm - Unsprung + Suspension
•  09 Nov 2024 - Decide bearings - Unspung
•  16 Nov 2024 - Version 1 of Upright design in CAD - Unsprung
•  16 Nov 2024 - Version 1 of Hub design in CAD - Unsprung
•  16 Nov 2024 - Suspension Geometry Finalized - Suspension

💨 Aeroshell:

Updates

• Updates Go Here

Week Plan

• Aero Dependencies Chart

• We selected who is working on different projects

• We have someone for shell to shell and canopy tilting

• Materials have been ordered for a lot of composites research projects, going to get the chance to make our test composites once they get in

Week Plan

Aerodynamics:

• Esther goes over how she made daybreak

• Either ANSYS lecture or more time spent working on the parts they have been assigned.

• Members continue working on projects that have been assigned

• decide on a few geometries for each thing to checkc

Composites

• Continue surface prep on Daybreak

• Continue research and start working on testing w/the materials that were just ordered (assuming they arrive)

• Continue sanding metal sheet

Aeroshell

• Reference sketch has been made

• Progess on the actual CAD of the aeroshell has been not too bad

Upcoming Deadlines

•  28 Oct 2024 - Deadline