Image Removed

Part 1: Prepare the Files in Rhino

Widget Connector

url	https://vimeo.com/471915785

Part 2: Fusion360

Widget Connector

url	https://vimeo.com/465887136

Step 1: Prepare Files

Image Removed

The goal of this section is to create:
- an STL file that represents our stock
- an STL that represents the model we want to end up with and cut out on the CNC.
- a DXF file that represents the perimeter of our model within our stock
We will be using Rhino for the following steps.
Make sure you are working in inches (if not, type in the units command to change it)
You should have a mesh file of the thing you want to cut. It could be an STL file of something you found online, an export from a program like Civil3D, or something you made in Rhino or Sketchup. Any type of file that Rhino can import should work.
Drag and drop the mesh file of your model into Rhino and "insert file". Click 'ok'. Then 'ok'. Then 'ok'. Click the origin to place the mesh
Move the mesh into its own layer named "model". Hide the layer.
Create a new layer named "stock"
Use the Box command and create a box the same size as your stock. Measure the length and width with a tape measurer to the nearest 1/16th inch and the depth to the nearest .001" using digital calipers.
Lock the stock layer so it can't move.
Unhide the model layer.
Click on your model. See if it says "1 block instance added to selection" in Rhino. If it does, type "explode" and hit enter. If it doesn't say this, don't do this step.
Scale your model as needed to make it fit inside your stock. I like to use the Orient command to scale it inside of the stock, however, you can also use the scale command and use the gumball to move the model inside of the stock.
If you want to cut out the entire model, follow these steps:
- draw a rectangle above the stock that is the exact outline of your model
  Image Removed
If you would only like to cut out a portion of your model, follow these steps:
- Draw a rectangle that represents the portion of the model you want to cut out
  Image Removed
- Use the extrudeCRV command to extrude the curve so that it goes through the entire model. Make sure Solid=No and DeleteInput=No (we want to preserve the rectangle you made for later)
  Image Removed
- Type in MeshBooleanSplit. Click the model you want to cut and press enter. Click the extrusion you just made and click enter.
- You can now select and delete the portion of the model outside of the extrusion.
  Image Removed
- You can now delete the extrusion you made, we no longer need it. Please don't delete the original rectangle that we used to make the extrusion.
You can now unhide the stock object, and make sure it is locked.
Select both the model and perimeter and move them near the origin of the stock, leaving 1" or 2" from the edge (see image)
Image Removed
The perimeter curve can be floating above the stock and model as you see in the picture above. I would recommend moving your model in the z-direction so that the top of the model is just below the top of your stock. It is ok if the bottom of the model is not touching the bottom of the stock.
Export Files
- Select only the model. Type "Export" and hit enter. Select the filetype to export as "STL". Save it with the name model.stl
- Make sure the stock layer is unlocked. Select only the stock. Type "Export" and hit enter. Select the filetype to export as "STL". Save it with the name stock.stl
- Select only the contour. Type "Export" and hit enter. Select the filetype to export as "DXF". Save it with the name perimeter.dxf

Step 2: Import files into Fusion 360

Import files into Fusion 360

Important: We need to make sure that you are using inches as the default unit.

On the top right side of the screen, click on the circle with your initials and click "preferences"

Image Removed

A window will appear. On the left-hand side of that window is a number of options. Under Default Units > Design select "in" for the option "Default units for new design". Do the same thing for Default Units > Manufacture.

Image Removed

Select OK.

Under the browser, expand "Document Settings and check to see what your units are. If they are not inches, click the edit icon

Image Removed

Import the model.stl file. Click "INSERT" > "Insert Mesh". Fusion 360 Will prompt you to navigate to your mesh file. Once you have found it, click Open then OK and you will have a solid representing your model.

Import the stock.stl file. Click "INSERT" > "Insert Mesh". Fusion 360 Will prompt you to navigate to your mesh file. Once you have found it, click Open then OK and you will have a solid representing your model.

You may find it helpful to rename the meshes under the Browser>Bodies (see below)

Image Removed

Import the perimeter.dxf file. Click "INSERT" > "Insert DXF".

Fusion 360 wants you to choose which plane you place the lines on. Select the plane that is located between the X and Y axis (the XY plane, look at the image below). Click the folder icon and navigate to your linework. Make sure you select "inches" under the units dropdown. Click OK to place your linework.
Image Removed

Change the appearance of the stock

It will be helpful to make the stock mesh clear so that we can see the model underneath.

First, near the bottom of the screen, select "Display Settings" and under "Mesh Display" make sure "Face Groups is not checked. This will make sure that the stock will change appearance in the next step.

Image Removed

Right-click on the stock under Bodies > Stock and select Appearance.

Image Removed

In the window that pops up, search for "clear" and drag and drop "Glass (clear)" onto your model

Image Removed

You should now have something like the following image (two meshes and a contour)

Image Removed

Create toolpaths in Fusion 360

If you haven't already done so, /wiki/spaces/SOAdigitech/pages/75237706. A template file is a pre-made set of CNC operations that will work for a given material and tool. We will be importing it into Fusion 360 later in this guide.

In this tutorial, I will be using the "Smooth Landscape Topography" file for Wood and a 1/2" ball nose endmill.

Navigate to the Manufacture workspace by clicking on the button in the top left-hand corner and selecting Manufacture

Image Removed

Make sure your project units are inches

In your browser, check what your units are set to and edit them by clicking the edit icon.
Image Removed

Create a Setup

A setup is how we tell Fusion 360 what our stock is and where our origin is.

Click Setup
Image Removed

Tab 1, Setup

On the first tab, called "Setup", set Origin to "Selected Point"

Make sure "WCS Origin" is selected and blue (see below)

Image Removed

Click the bottom-left-back corner of your stock. The original gumball will move here. This step is very important, take a second to make sure the origin is in the same place as the image below.

Image Removed

Important note: What this last step we did means is that the zero height for the z-axis is the bed of the CNC machine, so when you are zeroing the z-axis, you will place the metal plate on the bed of the CNC, not the top of your material.

This also means that the X,Y origin of your stock is the corner closest to the home corner of the CNC. When you jog the bit over to your stock, you will zero the X and Y position to this corner.

Lastly, under "Model", select "Nothing". It now wants you to select your model. Since your model is inside your stock, we can't simply select it in the view. We will have to expand the browser and select the mesh directly under Models > Project Name > Bodies > Model. See the image below.

Image Removed

Tab 2, Stock

On the Mode dropdown, select "From solid" and select your stock. Be careful as to not select your model.
Image Removed

Tab 3, Post Process

Under "Program Name/Number", give this setup a descriptive name. This will be the name the file saves as later.

Hit OK

Import template

This is the step where we import the template file you downloaded /wiki/spaces/SOAdigitech/pages/75237706.
Right-click on your "Setup1" and select "Create from template".
A window will appear. On the left-hand side, click My Templates > Local
Image Removed
Click the little "Import" icon and navigate to the downloaded template
Image Removed
Select the newly loaded template and click the "Select" button.
Image Removed

Once you have loaded the template file, you will see a number of operations under your setup, all of which will have a red error symbol.. We will need to go into each operation and update the referenced model, stock, and outline contours to the ones you added in the last section.

For Smooth Landscape Topography

Operation 1: "Create clearance around part"
- Double-click on the first operation called "Create clearance around part". A window will pop up.
  Image Removed
- Click the second tab named "Geometry"
- Click the box that says "Nothing" next to "Contour Selection" and select the perimeter rectangle you imported.
- Important: Look at your model in the same way as seen in the image below by clicking "front" on the view cube in the top right-hand of the screen. Look for the little red arrow that determines which side of the line the bit will cut on. Click the arrow to change it to the other side. Make sure the little arrow is on the outside of the perimeter contour.
  Image Removed
- Click "ok"
Operation 2: "Roughing Pass"
- Double-click on the first operation called "Roughing Pass". A window will pop up.
- Click the second tab named "Geometry"
- Click the box that says "Nothing" next to "Machine Boundary" and select the perimeter rectangle you imported.
- Click the box that says "Nothing" next to "Model Surfaces" and select your model mesh. You may have to expand your project in the browser and find your mesh under "Bodies"
  Image Removed
Operation 3: "Finishing Parallel"
- Double-click on the first operation called "Finishing Parallel". A window will pop up.
- Click the second tab named "Geometry"
- Click the box that says "Nothing" next to "Machine Boundary" and select the perimeter rectangle you imported.
- Click the box that says "Nothing" next to "Model Surfaces" and select your model mesh. You may have to expand your project in the browser and find your mesh under "Bodies"
- Click the box that says "Nothing" next to "Avoid/TouchServices" and select your model mesh again. Make sure that 'Mode' is set to 'touch'
Operation 4: " Cut out part"
- Double-click on the first operation called "Cut out part". A window will pop up.
- Click the second tab named "Geometry"
- Click the box that says "Nothing" next to "Contour Selection" and select the perimeter rectangle you imported.
- Important: Look at your model from the front by clicking "front" on the view cube in the top right-hand of the screen. Look for the little red arrow that determines which side of the line the bit will cut on. Click the arrow to change it to the other side. Make sure the little arrow is on the outside of the perimeter contour.
- Click "ok"

It may take a few minutes for all of the operations to finish generating. If the process has a percentage next to it, it is still generating

Image Removed

Simulate

Now that all of the processes are done generating, we will simulate the whole setup to get an idea of what will happen on the Shopbot CNC.

Right-click "Setup1" and select "Simulate"

Make sure the checkbox next to "Stock" is checked. This will let us see the stock being removed.

Press the play button at the bottom of the screen to start the animation.

You can change the speed by dragging the dot on the little slider at the bottom of the screen to the right.

I usually speed up the animation a bit and watch to make sure nothing odd happens during the machining operations.

Post-Process

Before you start, make sure you have downloaded this file. Drag and drop it onto your open Fusion 360 window.

Once you have simulated your toolpaths, it is time to export the file as a .sbp file that can be read by the Shopbot control software in the Build Lab

Right-click on "Setup1" and select "Post Process"

The Post Process window will appear.

Under the "Post Configuration" section, type in "Shopbot" in the search box and make sure "ShopBot OpenSBP / shopbot" shows up.

Image Removed

Select "Post"

A dialog box will pop up to save the file.

You are now ready to go to the Build Lab and use the ShopBot CNC machine (once you have been trained, of course)

Table of Contents

outline	true

Design | Stock Material

Must be in the Design workspace
Image Added
Verify units for your scale
Image Added

Create or Import your stock material to Fusion360

Expand

title	Click here to expand... Creating a rectangular stock within Fusion360

Click create sketch Image Added
Select your Work Coordinate System (WCS) between the X, Y plane with the Z going up
Image Added
Click create rectangle Image Added
1. Select the 0,0 reference and pull the rectangle up and to the right of the WCS
Click finish sketch Image Added
Click extrude sketch Image Added
1. Measure your stock material and extrude your sketch to the same thickness

Expand

title	Click here to expand... Importing stock material mesh file to Fusion360

Create your stock material within Rhino or anothermodeling program
Export that stock model to a .stl mesh file
In Fusion360 select insert meshImage Added
Select your stock model .stl file
Click OK

Rename your stock material (body) to keep your workspace clean
Change the opacity of your stock material by right clicking the item on the navigation tree>>opacity control>>50%
Image Added

Design | Model

Must be in the Design workspace
Image Added
On the top navigation bar, select Insert>>Insert DXF
Select your line work .dxf file by clicking the file folder icon
Image Added
Click plane/sketch and select the plane between the X, Y
1. Check your work coordinates orientation in the top right for clarity of X, Y positioning
2. If having trouble selecting the correct plane, hide your stock material by checking the eyeball in your navigation tree. This makes the stock material invisible and allows you to click through it.
3. Image Added
Click OK to insert your file

Manufacture | Setups

Must be in the Manufacture workspace
Image Added
On the top navigation bar, select new setup Image Added
Setup tab
1. Configure Work Coordinate System (WCS)
  1. Select the 0,0 ref point on the bottom of your stock material
  2. WCS should be on the X, Y plane
2. Model
  1. Use the navigation tree to select your line work (best method)
3. Image Added
Stock tab
1. Stock
  1. Use the navigation tree to select your stock (best method)
2. Image Added
Click OK

Manufacture | Create From Template

Must be in the Manufacture workspace
Image Added
Right click the setup you just created and select 'create from template'
Setup will default name to 'setup 2' in your navigation tree
Select the template titled V-Carving
You should see new operation(s) load in from the template
Select the edit icon (highlighted in red) to open template configuration
1. Image Added
Starting from left to right, we need to configure settings for this operation
1. Image Added
Image AddedTool tab
Expand
title Click here to expand tool tab configs...
Image Added
1. Select the tool required for your job as referenced on Templates for Fusion360 wiki page
  Tool = the bit used for this operation
2. Select a material preset
  Preset = feeds & speed variables are baked into preset profiles
  Image Added
Image Added Geometry
Expand
title Click here to expand tool tab configs...
Image Added
1. Select Geometry
  1. Geometry = Line work for tool path
  2. Use the navigation tree to select your line work (best method)
  3. Geometry settings cog will display a window to select cutting on the inside or outside of a specified line
    1. Image Added
2. Select Stock Contours
  1. Stock Contours = Creates a boundary box, keeping the tool within a certain perimeters
  2. Use the navigation tree to select your stock contours (best method)
Image Added Heights
1. Is configured for the School of Architectures ShopBot CNC machines and should not be changed.
Image Added Passes
1. Is configured for the School of Architectures ShopBot CNC machines and should not be changed.
Image Added Linking
1. Is configured for the School of Architectures ShopBot CNC machines and should not be changed.

Manufacture | Simulate

Must be in the Manufacture workspace
Image Added
Right click your setup template and select Simulate
Image Added
Watch the tool path simulation
1. Take notes on the order of operations, making sure inner cuts are done before outer cuts
2. Remember the simulation to help you out when you bring it to the ShopBot CNC as all the tool path and cuts will be exactly the same as in the operation
Once the simulation looks good, proceed with post-processing

Manufacture | Post-Processing

Must be in the Manufacture workspace
Image Added
Right click your setup template and select Post-Process
Image Added
Fill in the fields for
1. Post = What type of machine?
  1. Use ShopBot OpenSBP found on Templates for Fusion360
2. Name/number = Operation name within the ShopBot software
  1. May be left default
3. File name = File name
  1. Recommended naming syntax 'EID - Operation type - Project'
4. Comment = Displays during job
  1. Recommended to time and date the comment as multiple iterations may be needed to have a successful cut
5. Output folder = location to save the file
  1. Will save as *file_name.sbp*
Image Added

Page Properties

Versions Compared

Old Version 4

New Version Current

Key

Step 2: Import files into Fusion 360

Import files into Fusion 360

Create toolpaths in Fusion 360

Simulate

Post-Process

Design | Stock Material

Design | Model

Manufacture | Setups

Manufacture | Create From Template

Manufacture | Simulate

Manufacture | Post-Processing

Page Comparison

Versions Compared

Old Version 4

New Version Current

Key

Step 2: Import files into Fusion 360

Import files into Fusion 360

Create toolpaths in Fusion 360

Simulate

Post-Process

Design | Stock Material

Design | Model

Manufacture | Setups

Manufacture | Create From Template

Manufacture | Simulate

Manufacture | Post-Processing