Turn on HDV Deck | |
Click on Menu | |
Make sure HDV/DV is set to DV | |
Click on Video Out | |
Set to HDMI / CMPT to 480i | |
Audio Mixer Look for HDV 3 Turn up input level to about 0 db should be a good level | |
Make sure the Thunderbolt cable is connected to the computer back of the (IMac) There will be an adapter that looks like this connected to a cable connect the cable and |
adapter to the IMac that will be the connection to the Terranex | |
Put the tape in the deck | |
Click on PLAY |
Turn on the Teranex
Tip- It's good to play the tape while the Terranex is turning on so the signals sync | |
Turn on the Teranex and wait for it to power on it'll be about a minute | |
System Prefs >Blackmagic Desktop Video | Click on the Setup Icon |
System Prefs >Blackmagic Desktop Video Click On Video Input |
Set Default video as HD 1080p 23.98
Component Video | |
Click on the Audio Tab and change the Audio to RCA Click on Save | |
Open Blackmagic Media Express | |
Go to >Media Express> | |
Set the Video Format to |
Capture File Format will be ProRes 422 | |
Click on the Log and Capture Tab in Media Express |
...
...
You should see audio levels Then click on the Capture Button to start capturing. Capture Button will turn RED |
...
Click Capture to stop capturing | |
Turn off the Teranex when finished |
Turn off the VTR's when finished |