You will have your existing timeline from color correction but we're not going to use that WE are going to copy and paste that timeline into a new timeline | |
Right click in the Media Pool area >Choose >Timeline>CreateNew Timeline | |
Set the Timeline to be 1 Video Track 1 audio track that is 5.1 Uncheck Empty Timeline Click on "Create" | |
Click on the "Gear" Icon to set the correct aspect ratio for the timeline | |
Choose Master Settings We have a "flat" DCP 1998 x 1080 so make the timeline resolution 1998 x 1080 Same as if you had a 2048 x 858 Scope DCP Click on "Save" | |
Check Image Scaling Use this only if someone has given you a file that is not scope or flat Stretch Frame to all corners or try all the input scaling settings to make sure you are scaled right | |
Next go to >Fairlight>Bus Format | |
Choose Format 5.1 NOT 5.1 FILM!!Click on OK | |
Load the finished timeline that you already color corrected/exported then select all the clips by click "Command A" Next Copy and paste the image files from the old timeline into the new 5.1 timeline | |
Then copy the clips by selecting "Command C" or Edit>Copy | |
Load the newly created 5.1 timeline by double clicking it in the | |
Then paste the clips you copied from the original timeline | |
Add 5.1 file to media tool - Go to Media Tool | |
Locate the file on the hard drives and add it into Media Tool | |
Edit it into the timeline-Go back to Edit Mode | |
Then edit the 5.1 sound file on the 5.1 audio track Play for sync test and make sure all the timeline is in sync and sounds right | |
Last Export Quicktime for the Flat DCP for the Screening Deliverable for RTF screenings Click on Deliver tab | |
Click on Custom | |
Choose Single Clip | |
Choose Video Export Video Quicktime ProRes 422 1998 x 1080 DCI Flat 1:85 23.976 | |
Advanced Settings Check - Retain sub-black and super-white data | |
Click on the Audio Tab Choose Export Audio Codec Linear PCM 24 bit Main 5.1 | |
Click on Filename and title it | |
Click on Browse and put the file where you choose Click Save | |
Last click on Add to Render Queue Click Start Render |
Page Comparison
Manage space
Manage content
Integrations