...
This is how to setup the Front of the House Mixer Example shown here is how to hook up the Lecturn to channel one There is a break out box under the front of the stage that connects to the snake at the back of the stage |
|
Shown here we need a power supply for the lecturn mic plug into chanel 1 of the snake shown here |
|
Go to the platform at the front of the house that has the mixer Set up L/R so it's about at 5 Do Not press any of the MIX busses we don't use these like we do in this wiki to mix the monitors on the stage.
Make sure A fader is selected to adjust CHANNELS 1-29B fader selected to adjust 30-59 |
|
| Here are the mic inputs for 25 - 28 Red, Yellow, Green and Blue mics |
|
| Chanel 1 is the mic from the Lecturn so turn up the fader here |
|
Gain, Filter, Pan and Alt do different things but GAIN is helpful Press it  Gain to adjust Gain Filter to adjust filter Pan to adjust PANN Alt?? |
|
| Turn up the gain on the mic channel if needed |
|
