For times where loud studio playback is necessary, you can perform the following temporary modifications:
Easy: Adjust volume of studio announce speaker
1.You may need a ladder…or a tall friend. | |
2. Check the input level on the KRK speaker. Maybe even take a picture so you can remember what level to set it back at. Turn bottom knob to desired volume. | |
3. Set back to original level when finished and check levels. |
|
Medium: Install portable PA
...
Advanced: Connect studio announce to AV system
If you need it even louder, this should work for you.
1. Find a Mackie mixer. |
| ||||||
2. Unplug the XLR cable from the KRK. | |||||||
3. Plug in XLR extension. | |||||||
4. Plug other end of XLR extension into a channel on the Mackie mixer. Channel 15 is the chosen one in the picture to the right. | |||||||
5. Plug RCA cables from the output of the Mackie mixer tape out… | |||||||
6. …to the aux inputs on the Crestron rack. | |||||||
7. Choose audio only from the main crestron menu and mute or turn down the audio. | |||||||
8. Choose the composite input and slowly turn the volume up to the desired level. | |||||||
9. Extreme caution should be used when the system is set up this way. Please contact staff for assistance. |
| ||||||
10. Return system back to how you found it and check levels. |
|