Here is the projector loaded with a reel of film. |
| |||
|
| |||
there is a tricky metal flap between the projector arms that needs |
| |||
|
| |||
Hinged for the loading of film through the gate and unhinged to hold the film flat on gate for projection playback |
| |||
Put in Hinged position (shown here) for the loading of film through the gate |
| |||
Thread the film through the sprockets following the guide lines in red. Make sure the film sprockets are on the correct side. Only one side of the film has sprockets. |
| |||
Here is the guide of how to load the film. Follow the red arrows in this diagram as well as the red lined arrows on the projector itself. |
| |||
Close up of the lower winding path that is confusing |
| |||
Film out to To Take up reel |
| |||
Make sure all the gates are locked
|
| |||
|
| |||
|
| |||
Final loaded film setup for reference. |
| |||
This is the lever that controls the film playback. Pull forward to play film forward and all the way over to get the Lamp to turn on. |
| _GoBack | _GoBack |
Page Comparison
Manage space
Manage content
Integrations