...
1. Install the software for Cisco VPN shown at the top of this wiki 2. Make sure you are connected to the internet 3. From the >Start menu>All Programs> launch VPN Client. If the software does not have an entry for the UT VPN, type "vpn.utexas.edu". Click the Connect icon | |||
4. Enter your user name (eid) and password and click OK (eid password) and | |||
The second password is on your phone in your DUO app | |||
5. Status should read like this. Now connect to the shares normally. | |||
6. Go to the >Start Menu again>Click Run> and type in | |||
Type in \\fileserver2. | moody\ | Make sure that Connect with using different credentials is checked | |
7. Type in the UN: which is your UTEID with AUSTIN\ in front of it. Your password is your UTEID password. It should look like below. User name: AUSTIN\uteid Password: UTEID password 8. Click OK to mount the volume. | |||
To mount the editshare you need to have the client installed. Make sure that you are connected to vpn.utexas.edu following the above workflow. | http://172.17.66.133/clients/ESC/ Click on the above link to download the clients for windows and mac and install it. | ||
Then follow this wiki to put in the IP address and user name and password and mount the shares | EditShare Connect - How to Mount Editshare Volumes |