...
Follow First Steps to setup up the RODECaster | ||
Follow RODE Broadcaster Mic to make sure the mic is ready to use | RODECaster Pro - RODE Broadcaster MicThese settings Make sure Enable Mix-Minus is turned on This will automatically mute the speakers in the room so you will not get feedback | |
Turn up the sliders on the board and talk into the mic | ||
Have each guest and interviewer speak directly into the front of the mic, and not from the sides | ||
Set the levels by watching the meters as you speak. You'll be at a good level to record when the color of the level bars peak at green going into yellow (see picture →) You should never hit red! | ||
You can adjust headphone volume with these knobs | ||
Click on the Green REC button to start recording to the SD card | ||
When recording the button will be RED | ||
This icon is how much time you have left to record on the card | ||
Conduct the narration, interview or podcast and when finished press REC button to stop recording | ||
To hear what you did press the Settings Icon | ||
Click on Podcasts | ||
You can click on the top left and right arrows to navigate through the podcasts and click on the green play button to play the selection | ||
Turn up a fader on the board to hear in the room speakers as well as the headset | ||
Turn up the ceiling speaker volume to hear playback in the room Turn up the headphone volume for playback in headphones | ||
Now to transfer your files off the RODECaster. Click the link to learn how. |
...