Change the Dennon to Surround Mch STEREO
Launch the Audio MIDI Setup tool. Click HDMI and Output
Choose Configure Speakers. Multichannel 5.1 Surround and set to these settings below. Click Apply.
Launch ProTools | Open a session |
Check the Playback Engine> go to >Setup>Playback Engine |
|
Make sure the HDMI output is selected and you will need to restart if it is not already selected |
|
Click on >Setup>I/O |
|
Click on the 5.1 path order and make sure the L, R, C, LFE, Ls and Rs are selected |
|
Select all the ouputs and delete them. |
|
After all the outputs are selected click delete path |
|
Click Delete |
|
Click on "New Path" |
|
Choose to create 1 new track 5.1 and path = Output |
|
The channels will be blank but you can click in the blank area with the pencil tool and they will auto populate |
|
Click OK to Apply |
|
Go to >Track>New |
|
Create one new 5.1 audio track – Create |
|
Import your audio to the track. Set the output of the track to the 5.1 output that you just set up |
|
Go To >Window> |
|
In the mix window on the track with the 5.1 output you will see the "Multi Channel" Panner window |
|
To see the Multichannel fader larger click on the mini fader |
|
This will open the surround window |
|
