Lavs come with two very similar looking pieces, a transmitter and a receiver. |
|
Receiver is the end that will plug into the Audio Mixer |
|
Here is the Receiver plugged into an audio mixer. It will also have the RF on the front of the receiver. |
|
The Transmitter is connected to the microphone placed. Start with the mic about 8 inches below your talent's chin and adjust it from there until it sounds natural in your headphones. |
|
Make sure both units have 2 AA batteries each. |
|
ON light turns red for ON |
|
Out of the box, the transmitter and receiver should have matching frequencies, meaning they can talk to each other wirelessly |
|
To Change the frequency |
|
Press up/down buttons to select "Frequency Preset" |
|
Use the Up and Down arrow buttons to change the frequency |
|
To Set frequency hit SET |
|
then hit the on/off button to get out of the menus. |
|
Manage space
Manage content
Integrations