Turn on HDV Deck | |
Click on Menu | |
Make sure HDV/DV is set to DV | |
Click on Video Out | |
Set to HDMI / CMPT to 480i | |
Audio Mixer make sure the Tape to mix button should be pushed to get the audio from the DVCAM deck. | |
Make sure the Thunderbolt cable is connected to the computer (IMac) and the Teranex | |
Put the tape in the deck | |
Click on PLAY make sure there is some image on the tape and play for a at least 20 seconds | |
Turn on the Teranex | |
System Prefs >Blackmagic Desktop Video | |
Open Blackmagic Media Express | |
Go to >Media Express> | |
Set the Video Format to | |
Click on the Log and Capture Tab in Media Express |
Set Input to
Video – SDI
Audio – Analog
Format – 1080
Frame – I
Rate 59.94
Aspect Leterbox
ADJ – can adjust levels and some other things
Set Output
Video – SDI
Audio – EMBED - Analog
Format – 1080
Frame – P
Rate 23.98
Aspect Leterbox
ADJ – can adjust levels and some other things
You should see audio levels
Then click on the Capture Button to start capturing.
Capture Button will turn RED
Click Capture to stop capturing
Turn off the Teranex when finished | |
Turn off the VTR's when finished |