Turn on the RØDECaster if it isn't already

First step is to FORMAT the SD card that is in the RØDECaster.

1. Click on the Gear icon in the top left corner of the LCD screen on the RØDECaster.
2. Click on Hardware icon
   
3. Click on microSD Card icon
   

Slide the switch to ERASE the SD Card

Click YES to confirm erasing the SD Card

There are four microphones setup, just put on the headphones for whichever microphones are you using

If you would like to use the mic high-pass filter that you use when you want to put the mic really close to a source but don't want the added low end due to proximity effect

Make sure the rolloff switch is flipped toward the mic

Next set the sound input to the computer.

Go the the Apple in the upper right hand corner and choose >System Preferences

Choose >Sound

Go to the Input Tab

Choose the RØDECaster Pro Stereo USB

Make sure the RODEcaster is set to Mix Minus

Press Settings

These settings Make sure Enable Mix-Minus is turned on

This will automatically mute the speakers in the room so you will not get feedback

Next we need to make sure the microphones are set correctly

Select the Microphone channel selector softkey for the mic you want to use

EX: #2

Make sure it is set to RODE

Broadcaster

Make sure that Phantom Power is on and the Level is set to 18

Turn up the sliders on the board and talk into the mic

Have each guest and interviewer speak directly into the front of the mic, and not from the sides

Set the levels by watching the meters as you speak.  You'll be at a good level to record when the color of the level bars peak at green going into yellow (see picture →)

You should never hit red!

You can adjust headphone volume with these knobs

Click on the Green REC button to start recording to the SD card

When recording the button will be RED

This icon is how much time you have left to record on the card

In this example there is 8 hours and 46 minutes left on the card

Conduct the narration, interview or podcast and when finished press REC button to stop recording

To hear what you did press the Settings Icon

Click on Podcasts

You can click on the top left and right arrows to navigate through the podcasts and click on the green play button to play the selection

Turn up the ceiling speaker volume to hear playback in the room

Turn up the headphone volume for playback in headphones

Once you have completed recording you can use the Podcast Transfer Mode to transfer the audio files to the computer.

Note that when the RØDECaster is in ‘Podcast Transfer Mode’ all other functionality is disabled.

To get to the Podcast Transfer Mode click on the gear icon in the top left corner of the LCD screen on the RØDECaster Pro.

Click on HARDWARE icon

Click on microSD Card icon

Flip the Podcast Transfer Mode switch to ON

Confirm switching to Podcast Transfer Mode by clicking YES

Note: When the RØDECaster is in ‘Podcast Transfer Mode’ all other functionality is disabled.

The RØDECaster will mount as a volume on the desktop

The recorded .WAV audio files are in the folder called PODCASTS

The .WAV audio files are useful as-is, but they've been recorded as Multi-Channel or Poly-Channel.  This means all of the inputs of the RØDECaster have been recorded independent of each other.

The most popular file for uploading podcasts directly to the internet is known as the Stereo Mix.  This means all of the channels have been mixed together into a 2 channel audio file.  If you want to extract this file from your multi-channel recording, you will need to continue to the next steps.

Open the RØDECaster Pro software in the Applications folder

When it launches it will show you the podcasts in a list

Find your podcast

Title it and choose a custom color and then click on Save

Choose a place to save it and click Open

The files save with all the different mics and channels that may or may not have audio on them.

If you want the full mix of all of the inputs, then choose Stereo Mix.wav

You can check the mix in Quicktime Player or VLC Player on the mac computer.

You can either customize the WAV file in a digital audio editor, or use can use the file as-is.

If using the computer to playback/edit your audio file, you will need turn up the USB Channel input on the RØDECaster to monitor the audio

Adding Sound effects

All of these colored buttons have sound effects assigned to them.

To customize these assigned sound effects see the following wiki: