Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

eXpress build instructions on TACC Ranger

author's installation instructions: http://bio.math.berkeley.edu/eXpress/tutorial.html#install

On Ranger, we don't need to install cmake or boost, already have that as a module

Setup environment

Setup environment:
module swap $TACC_FAMILY_COMPILER gcc
module load cmake
module load boost
Download source for eXpress and BamTools (both links are availabe in the "author's installation instructions" link above)
wget http://bio.math.berkeley.edu/eXpress/downloads/express-1.1.0/express-1.1.0-src.tgz
tar zxvf express-1.1.0-src.tgz
cd ./express*/
# Remember where eXpress unpacked itself

MY_EXPRESS_DIR=`pwd`

# Download BamTools from github
wget --no-check-certificate https://github.com/downloads/pezmaster31/bamtools/bamtools-1.0.2.tar.gz
# extract BamTools into $MY_EXPRESS_DIR then install

tar zxvf bamtools-1.0.2.tar.gz

cd ./bamtools*/
# Remember where BamTools unpacked itself
MY_BAMTOOLS_DIR=`pwd`
Build bamtools
cd $MY_BAMTOOLS_DIR
mkdir build
cd build
cmake ..
make
Build and Install eXpress
cd $MY_EXPRESS_DIR
mkdir build
cd build
cmake ../src

# cmake doesn't do a good job of building the file "$EXPRESS_DIR/src/build/CMakeFile/express.dir/link.txt" it ignores the links needed for BamTools and Boost, but we can fix that!
echo "/opt/apps/gcc_amd/4.4.5/bin/c++ -I/opt/apps/gcc4_4/boost/1.48.0/include CMakeFiles/express.dir/biascorrection.o CMakeFiles/express.dir/bundles.o CMakeFiles/express.dir/fld.o CMakeFiles/express.dir/fragments.o CMakeFiles/express.dir/main.o CMakeFiles/express.dir/mapparser.o CMakeFiles/express.dir/markovmodel.o CMakeFiles/express.dir/mismatchmodel.o CMakeFiles/express.dir/robertsfilter.o CMakeFiles/express.dir/sequence.o CMakeFiles/express.dir/targets.o CMakeFiles/express.dir/threadsafety.o -o express -rdynamic -Wl,-rpath,/work/01863/benni/express-1.1.0-src/bamtools/lib -L/work/01863/benni/express-1.1.0-src/bamtools/lib -lbamtools -L/opt/apps/gcc4_4/boost/1.48.0/lib -lboost_filesystem -lboost_thread -lboost_system -lboost_program_options -lpthread" > $EXPRESS_DIR/src/build/CMakeFile/express.dir/link.txt 

make CXX_FLAGS="-I$TACC_BOOST_INC -I../bamtools*/include"

  • No labels