The electronics component of our build consists of a 12V DC motor, a 12V power supply, an Arduino Uno microcontroller, and an Arduino Motor Shield. The motor shield is mounted onto the microcontroller, and then the components are configured as follows (power supply instead of batteries):
The board controls the motor by running a program when the system is powered. This program writes a constant PWM value to the motor shield as follows:
int directionPin = 12; int pwmPin = 3; int brakePin = 9; void setup() { //define pins pinMode(directionPin, OUTPUT); pinMode(pwmPin, OUTPUT); pinMode(brakePin, OUTPUT); } void loop() { digitalWrite(directionPin, HIGH); //release breaks digitalWrite(brakePin, LOW); //set work duty for the motor analogWrite(pwmPin, 170); }