OBS - Open Broadcaster Software - how to capture a BluRay or DVD Disk in the Digital Media Labs using the Teranex

Open OBS in Applications

Then go to

>OBS

>Preferences

Go to

>Output

>Recording

Set Recording Path to your hard drive or where you want to save your recording

Next Recording Quality set to High Quality unless you want to increase the quality?

You can also choose the type of file you want to record but Fragmented MOV is the default

Click OK when done setting the recording properties

Then go to Video tab

Set the Resolution to 1920 x 1080

Next click on the

Advanced Audio Properties Icon

Open

Set the Audio Monitoring to Master and Output

There will always be one Scene

But on the Sources tab we need to add sources

Click on the + icon to add a source

After hitting + choose

Video Capture Device

Choose to Create New and choose Video Capture Device

Click OK

After you click OK the next screen

Choose the Device Blackmagic Teranex 3D Processor

Preset High

Then click the + button again to add the audio source

Choose Audio Input Capture

Choose Create New and Audio Input Capture

Click OK

Choose Device

Blackmagic Teranex 3D Processor

Un-Check

Enable Downmixing

You want to select the channels that have the correct audio. Some BluRays you have to look for the left right and center channels. Sometime the Center Channel is on channel 4

Try the channels till the right audio comes out the monitoring

Here is an example of the audio routing properly you’ll see levels in the Audio Input Capture

On the Mic/Aux make sure that is turned down all the way or else it’ll pickup the audio mic on the mac.

Now that we have image and sound setup

Click on Start Recording

Click Stop Recording to stop

The recording will go and will titles will be year date and etc.