Canon C100 and Ninja 2 Setup for Recording

Attach the Lens to camera. Line up the red dot on the lens to the red dot on the camera housing.
Turn the lens Clockwise to secure it to the housing.
To remove the lens press this button and turn lens counter clockwise.
Battery Release to remove batteries for charging
Attach the handle to the top of the camera housing. Slide the handle bracket into the camera-housing bracket.
Screw down the handle on the bracket
Attach the handle remote cable to the camera body
NINJA Setup Slide the SSD hard drive in the caddy into the Ninja2 Don't force it make sure you have it lined up correctly. Only goes in one way.
Place the battery on the back of the Ninja following the arrows on the back of the Ninja
Mounting the Ninja to the C100 Screw in the mounting ball into the camera handle shown here
Screw in the mounting ball into the Ninja Tighten the handle of the mounting bracket around both mounting balls connecting the camera to the Ninja as shown here.
Insert battery or connect power. Turn camera on here.
Press the Menu button to access the camera set up menus
Use the button on the camera body handle to navigate the menus. Press button to select menu items.