Pro Tools - CMB 1st Floor Edit Suites How to set up Monitoring and Video playback

TWO THUNDERBOLT CABLES HAVE TO BE PLUGGED IN!!!! TO THE IMAC Check that the WHITE Thunderbolt cable is plugged into the IMac
Make sure the other end of the WHITE - Thunderbolt cable is plugged into the Blackmagic Design Intensity Pro as shown here.
NEXT Check that the otherThunderbolt cable is plugged into the IMac
The other end of the black Thunderbolt cable needs to be plugged into the AVID Native Thunderbolt box Shown Here
Make sure the AVID OMNI is turned on
Open ProTools>Create Session or open existing session
Go to Setup>Playback Engine
Choose HD Native Thunderbolt
Go to Setup>Hardware

Go to the Monitor Tab

Change the Format drop down to Stereo>click OK
Main Tab - change to Monitor 1-2 out to make the stereo output active>Click OK

Next go to Setup > I/O

Go to the Output Tab
The Stereo Monitor is the monitor we will be monitoring audio.

Click on the Bus tab and make sure that the Bus Output matches the same Output in the "Output" tab in the previous screen grab

Set all channels to Stereo Monitor (Stereo) or Stereo Monitor L and or R depending on your needs.