AVID- Premiere and Davinci Resolve - Audio and Video Monitoring in CMB 1st floor Rooms
Check that the WHITE Thunderbolt cable is plugged into the IMac |
|
Make sure the other end of the WHITE - Thunderbolt cable is plugged into the Blackmagic Design Intensity Pro as shown here. | |
Log into the computer
| |
| |
Click on Settings Button | |
Click on Video> | |
Click on Audio Tab (if there is one) > Click on RCA Close the Desktope Video click the red button in the corner | |
Back to System Preferences Select Sound | |
Select Output Tab > Blackmagic Option | |
If you have video you would like to use in your protools session turn on the TV MAKE SURE THAT THE SOURCE IS SET TO COMPONENT - | |
PRESS THE SOURCE BUTTON UNDERNEATH THE "9" KEY TO SET INPUTS ON THE MONITOR - Don't change this should be set correctly but just in case it should be set to component input. | |
If you are in suite CMB 1.108B then you have a newer Monitor and have this remote Power and Input buttons will be what you need. Input should be on HDMI | |
Select the application that you want to run AVID or Davinci Resolve or Premiere | |
AVID you need to make sure the Software sees the Blackmagic Design Input and Output device On the timeline there is a small TV icon RIGHT click it with the Mouse and choose Intensity Extreme | |
Set Adobe Premiere Pro Playback Settings to Play on the Monitor and SpeakersChoose "Premiere Pro CC > Preferences > Playback..." | |
Choose Blackmagic Playback Click OK | |
Choose "Premiere Pro CC > Preferences > Audio Hardware..." | |
Make sure you Preferences look like this | |
If you get this error click Yes | |
Click OK | |
Don't forget to pan channel 1 LEFT & channel 2 RIGHT and don't use any other tracks | |
USE ONLY TRACK MIXER not CLIP MIXER | |
Some of the Suites on the 1st floor have a Mixer. The mixer settings are shown here. Channel 1 and 2 are AVID playback are ProTools playback Also turn up the Master audio on the Board labeled Volume | |
Some suites have the Mackie Big Knob ProTools and AVID Inputs are labeled and use Monitor Select B make sure Mute is not pressed |
Welcome to the University Wiki Service! Please use your IID (yourEID@eid.utexas.edu) when prompted for your email address during login or click here to enter your EID. If you are experiencing any issues loading content on pages, please try these steps to clear your browser cache.