AVID- Premiere and Davinci Resolve - Audio and Video Monitoring in CMB 1st floor Rooms

Check that the WHITE Thunderbolt cable is plugged into the IMac

 

Make sure the other end of the WHITE - Thunderbolt cable is plugged into the Blackmagic Design Intensity Pro as shown here.

Log into the computer



Go to System Prefs



Go to Blackmagic Desktop Video

Click on Settings Button

Click on Video>
Choose Video Output > Select Component and choose 1080p23.98

Click on Audio Tab (if there is one) > Click on RCA

Click on Save


Close the Desktope Video click the red button in the corner

Back to System Preferences

Select Sound


Select Output Tab > Blackmagic Option

If you have video you would like to use in your protools session turn on the TV

MAKE SURE THAT THE SOURCE IS SET TO COMPONENT -


PRESS THE SOURCE BUTTON UNDERNEATH THE "9" KEY TO SET

INPUTS ON THE MONITOR - Don't change this should be set correctly but just in case it should be set

to component input.

If you are in suite CMB 1.108B then you have a newer Monitor and have this remote


Power and Input buttons will be what you need.


Input should be on HDMI